Kubernetes management

Overview

This page describes the creation and management of Kubernetes clusters in our OpenStack-based stoney cloud using the Magnum container orchestration engine (COE).

Note: This page is a work-in-progress, so if you face any challenges, please contact us with the specific issue.

Images

To list available Kubernetes images, use openstack image list with the following yq/jq filter:

openstack image list --format yaml | yq '[ .[] | select(.Name != null) | select(.Name | match("(?i)kubernetes")) ]'

Example output:

- ID: da535156-e7c8-461d-a0ed-03bcf878d5a6
  Name: 'Ubuntu 22.04 (240702): Kubernetes v1.28.11'
  Status: active
- ID: aa1eb1ec-c358-4bd6-a606-5272de053484
  Name: 'Ubuntu 22.04 (240702): Kubernetes v1.29.6'
  Status: active
- ID: db68e8e8-d4b4-4c4f-af41-4166eb33973d
  Name: 'Ubuntu 22.04 (240702): Kubernetes v1.30.2'
  Status: active

openstack image list --format json | jq '[ .[] | select(.Name | . != null and match("(?i)kubernetes")) ]'

Example output:

[
  {
    "ID": "da535156-e7c8-461d-a0ed-03bcf878d5a6",
    "Name": "Ubuntu 22.04 (240702): Kubernetes v1.28.11",
    "Status": "active"
  },
  {
    "ID": "aa1eb1ec-c358-4bd6-a606-5272de053484",
    "Name": "Ubuntu 22.04 (240702): Kubernetes v1.29.6",
    "Status": "active"
  },
  {
    "ID": "db68e8e8-d4b4-4c4f-af41-4166eb33973d",
    "Name": "Ubuntu 22.04 (240702): Kubernetes v1.30.2",
    "Status": "active"
  }
]

Node groups

Node groups are used to create Kubernetes nodes with different properties (for example flavors).

When creating a cluster, the following two node groups are created by default (see openstack coe nodegroup list):

+--------------------------------------+----------------+-----------------------------+--------------------------------------+------------+-----------------+--------+
| uuid                                 | name           | flavor_id                   | image_id                             | node_count | status          | role   |
+--------------------------------------+----------------+-----------------------------+--------------------------------------+------------+-----------------+--------+
| 5914ba24-99e5-4adf-b1a7-f53f8872d001 | default-master | Standard Düdingen c002m0004 | aa1eb1ec-c358-4bd6-a606-5272de053484 |          1 | CREATE_COMPLETE | master |
| 93e2c2c4-e4b1-4874-ad64-2b832868ff10 | default-worker | Standard Düdingen c002m0004 | aa1eb1ec-c358-4bd6-a606-5272de053484 |          1 | CREATE_COMPLETE | worker |
+--------------------------------------+----------------+-----------------------------+--------------------------------------+------------+-----------------+--------+

Notes:

• The node group default-master is used for Kubernetes control plane nodes.
• The node group default-worker is used for Kubernetes worker nodes.

Creation

Creation - Cluster template

Use openstack coe cluster template create to create a cluster template:

# ID or name of the OpenStack Kubernetes image to use:
image=c539d525-d912-4acb-a7c3-bfcaf5f533c5 # Ubuntu 22.04 (20240605): Kubernetes v1.30.1

# Name of the cluster template to create:
cluster_template=''

openstack coe cluster template create "$cluster_template" \
  --coe kubernetes \
  --image "$image" \
  --external-network public \
  --master-flavor 'Standard Düdingen c002m0004' \
  --flavor 'Standard Düdingen c002m0004' \
  --public \
  --master-lb-enabled

Request to create cluster template kubernetes-1.30.2 accepted
+-----------------------+--------------------------------------+
| Field                 | Value                                |
+-----------------------+--------------------------------------+
| insecure_registry     | -                                    |
| labels                | {}                                   |
| updated_at            | -                                    |
| floating_ip_enabled   | True                                 |
| fixed_subnet          | -                                    |
| master_flavor_id      | Standard Düdingen c002m0004          |
| uuid                  | d69969e7-1239-4810-b092-c758d3e9ef2e |
| no_proxy              | -                                    |
| https_proxy           | -                                    |
| tls_disabled          | False                                |
| keypair_id            | -                                    |
| public                | True                                 |
| http_proxy            | -                                    |
| docker_volume_size    | -                                    |
| server_type           | vm                                   |
| external_network_id   | public                               |
| cluster_distro        | ubuntu                               |
| image_id              | db68e8e8-d4b4-4c4f-af41-4166eb33973d |
| volume_driver         | -                                    |
| registry_enabled      | False                                |
| docker_storage_driver | overlay2                             |
| apiserver_port        | -                                    |
| name                  | kubernetes-1.30.2                    |
| created_at            | 2024-08-07T14:39:52.314174+00:00     |
| network_driver        | flannel                              |
| fixed_network         | -                                    |
| coe                   | kubernetes                           |
| flavor_id             | Standard Düdingen c002m0004          |
| master_lb_enabled     | True                                 |
| dns_nameserver        | 8.8.8.8                              |
| hidden                | False                                |
| tags                  | -                                    |
+-----------------------+--------------------------------------+

For a list of all labels see Magnum User Guide - Labels.

Creation - Cluster

Use openstack coe cluster create to create a cluster:

# ID or name of the cluster template to use:
cluster_template=''

# Name of the cluster to create:
cluster=''

openstack coe cluster create "$cluster" \
  --cluster-template "$cluster_template" \
  --master-count 1 \
  --node-count 2

Example output:

Request to create cluster 9bb54949-2469-4b7e-99c8-4cb2730d4e8f accepted

Options:

• --master-count: number of control plane nodes. Note that the number of control plane nodes must be odd due to etcd. Cluster creation will fail if the number of control plane nodes is even.
• --node-count: number of worker nodes.

data "openstack_containerinfra_clustertemplate_v1" "k8s_template_1_30" {
  name = "kubernetes-1.30.2"
}

resource "openstack_containerinfra_cluster_v1" "cluster_1" {
  name                = "cluster-1"
  cluster_template_id = data.openstack_containerinfra_clustertemplate_v1.k8s_template_1_30.id
  master_count        = 1
  node_count          = 2
}

After creating the cluster, you can inspect the cluster's state using openstack coe cluster list (it will take some time for the cluster to be created):

openstack coe cluster list

Status during cluster creation:

+--------------------------------------+----------------+------------+------------+--------------+--------------------+---------------+
| uuid                                 | name           | keypair    | node_count | master_count | status             | health_status |
+--------------------------------------+----------------+------------+------------+--------------+--------------------+---------------+
| e41cc55c-9f63-4880-9c18-0c021545efa4 | sst-yde-test-1 | None       |          1 |            1 | CREATE_IN_PROGRESS | None          |
+--------------------------------------+----------------+------------+------------+--------------+--------------------+---------------+

Status after that the cluster has been successfully created:

+--------------------------------------+----------------+------------+------------+--------------+--------------------+---------------+
| uuid                                 | name           | keypair    | node_count | master_count | status             | health_status |
+--------------------------------------+----------------+------------+------------+--------------+--------------------+---------------+
| e41cc55c-9f63-4880-9c18-0c021545efa4 | sst-yde-test-1 | None       |          1 |            1 | CREATE_COMPLETE    | HEALTHY       |
+--------------------------------------+----------------+------------+------------+--------------+--------------------+---------------+

Creation - Cluster - Access

To access a created cluster with kubectl, helm etc., use openstack coe cluster config to retrieve the cluster's configuration (essentially the "kubeconfig" file):

# ID or name of the cluster:
cluster=''

# Path to the directory where the Kubeconfig file will be stored:
directory="$HOME"/.kube

# Make sure the directory exists:
mkdir --parent "$directory"

# Download the kubeconfig.
# This will create the kubeconfig file at $directory/config
openstack coe cluster config --dir "$directory" "$cluster"

Depending on where the kubeconfig file has been store, you will need to set the environment variable KUBECONFIG accordingly (if you used the directory .kube in your home directory, this step is not required as ~/.kube/config is the default kubeconfig path):

export KUBECONFIG=/path/to/kube/config

You will now be able to access the cluster using kubectl:

kubectl get node -o wide

NAME                                                     STATUS   ROLES           AGE   VERSION    INTERNAL-IP   EXTERNAL-IP   OS-IMAGE             KERNEL-VERSION       CONTAINER-RUNTIME
sst-yde-test-1-fj6ladv5sne3-control-plane-jl86d          Ready    control-plane   45m   v1.28.11   10.0.0.149    <none>        Ubuntu 22.04.4 LTS   5.15.0-113-generic   containerd://1.7.13
sst-yde-test-1-fj6ladv5sne3-default-worker-b2c7j-5bh2w   Ready    <none>          44m   v1.28.11   10.0.0.150    <none>        Ubuntu 22.04.4 LTS   5.15.0-113-generic   containerd://1.7.13

Scaling

Scaling - Worker nodes

Use openstack coe cluster resize to change the number of worker nodes in a cluster:

# ID or name of the cluster:
cluster=''

# Number of worker nodes:
nodes=''

openstack coe cluster resize "$cluster" "$nodes"

Upgrade

To upgrade a cluster (upgrading the version of Kubernetes), a new cluster template needs to be created first. This cluster template must use a newer Kubernetes version than the one used in your current cluster template.

After creating the cluster template, use openstack coe cluster upgrade to assign the new cluster template to your cluster:

# ID or name of the cluster to upgrade:
cluster=''

# ID or name of the new cluster template to use:
cluster_template=''

openstack coe cluster upgrade "$cluster" "$cluster_template"

Request to upgrade cluster sst-yde-test-1 has been accepted.

After running openstack coe cluster upgrade, you can inspect the cluster's state using openstack coe cluster list (it will take some time for the cluster upgrade/downgrade to be completed):

openstack coe cluster list

During the upgrade:

+--------------------------------------+----------------+------------+------------+--------------+--------------------+---------------+
| uuid                                 | name           | keypair    | node_count | master_count | status             | health_status |
+--------------------------------------+----------------+------------+------------+--------------+--------------------+---------------+
| e41cc55c-9f63-4880-9c18-0c021545efa4 | sst-yde-test-1 | None       |          1 |            1 | UPDATE_IN_PROGRESS | UNHEALTHY     |
+--------------------------------------+----------------+------------+------------+--------------+--------------------+---------------+

After the upgrade:

+--------------------------------------+----------------+------------+------------+--------------+-----------------+---------------+
| uuid                                 | name           | keypair    | node_count | master_count | status          | health_status |
+--------------------------------------+----------------+------------+------------+--------------+-----------------+---------------+
| e41cc55c-9f63-4880-9c18-0c021545efa4 | sst-yde-test-1 | None       |          1 |            1 | UPDATE_COMPLETE | HEALTHY       |
+--------------------------------------+----------------+------------+------------+--------------+-----------------+---------------+

Downgrade

A downgrade of a cluster works the same as an Upgrade, but you will have to use a cluster template using an image with an older Kubernetes version.

Deletion

Deletion - Cluster template

Use openstack coe cluster template delete to delete a cluster template:

# ID or name of the cluster template to delete:
cluster_template=''

openstack coe cluster template delete "$cluster_template"

Deletion - Cluster

Use openstack coe cluster delete to delete a cluster:

# ID or name of the cluster to delete:
cluster=''

openstack coe cluster delete "$cluster"

Troubleshooting

Troubleshooting - Adjusting the Kubernetes image label kube_version

When creating a cluster using openstack coe cluster create, you might encounter the following error:

Image c539d525-d912-4acb-a7c3-bfcaf5f533c5 does not have a kube_version property.

To fix this problem, add the kube_version property to the image:

# ID or name of the OpenStack Kubernetes image to adjust:
image_id=''

# The Kubernetes version of the image:
k8s_image_version=v1.30.1

# Adjust the image and add the "kube_version" property:
openstack image set "$image_id" --property kube_version="$k8s_image_version"

After adjust the image property you will have to delete the existing cluster and re-create it using openstack coe cluster create.